This is a remodeled version of the Pz.B.39 which originally came from Thingiverse; with this model, many new things were included such as a handguard, working magazine, Functioning Bipod, as well as a ejection system for the round.

It is a complex model and should, as indicated in the added manual, be taken care of and well built if used in reenactment or as cosplay.

Everything concerning assembly will be in the manual so there isn't much I will add here.

NOTE: This is by no means a accurate interpretation of the gun and serves for reenactment, cosplay, or general display only! It can also not be converted to a functioning firearm!

NOTE: I used a CR10 S5 so sizes in parts could function while also may not on smaller printers!!!

Print Bed: 60 degrees celsiusNozzle: 200 degrees celsiusInfill density: 20%

Support density: 5%Support type: BrimSupport Angle: 45 degrees

(If you use Cura, you can simply use the standardized quality types in the dropdown menu. Layer height varies as some parts should be printed with much detail while others will work perfectly with 0.2mm or more.)