File: Laser Upgrades.stlName: DIY Laser Engraver UpgradesPLA Material: 46.37 grams ( 0.102 lbs) Infill = 10%Size: 105.08 mm (4.137") x 88.90 mm (3.500") x 50.80 mm (2.000")Resolution: 0.20mmLayers: 260 layers Rafts: Yes Supports: NoPrint Time: 4 hr 32 minFunction: If you buy a DIY laser engraver either as a kit or already built, you probably need this upgrade. There are seven parts in this kit. The kit should be printed 1:1. There are four feet that replace the simple feet plates. The new feet will use two #1/4-20 hex nuts and a long threaded hex bolt so you can easily engrave different thickness materials quickly without stacking items as impromptu shims. There are two small extrusion nut holders that slide into the end extrusions. Each nut holder accepts a #4-40 hex hut. The final piece is a location corner so you can engrave multiple pieces using the same X and Y origin without resetting them. Attach the location corner to the two hex nuts with two #4-40 x 0.375" machine screws.