Print your own five weenies! Er, four.

These are functional screw-top pill canisters for Shouto Todoroki cosplay. These are made to fit on a 5mm thick triangular carabiner clip (easily purchased on Amazon).

Contains 2 STL files for 3d printing. Printing in tougher filament or resin like ABS is recommended as the loops are a fragile point that sustains a lot of stress during normal con wear and people bumping into them (aerospace grade nylon filament recommended, but it is harder to obtain). Due to the nature of resin, the screw top doesn't tend to print as well in standard resins compared to filament prints, so filament printing is recommended for smoother unscrewing.

To obtain a smooth metallic finish, priming the prints with Rust-oleum Automotive Sandable Spray Primer and filling any major imperfections with Bondo and wet sanding down to 1000+ grit before painting is recommended. Prints pictured were airbrushed with Angelus leather paint in Pewter.