Model dimensions:

• length – 904 mm
• height – 360 mm
• width – 121.5 mm

The model consists of parts: barrel insert, barrel part 1, barrel part 2, barrel part 3, barrel part 4, body front part, body middle part, body rear part, chambers, emiter, front grid, front handle, indicators, left insert, plates, rear grid, rear handle, rear side insert, regulator, right insert, scope part 1, scope part 2, screen, shell, side buttons, sight, trigger, washers.

During assembly, use guiding rods or tubes d=4 and d=8 mm.

While gluing the plexiglass part, please, do not use super glue or any standard usual bonding agent. The produced gas will reduce the clearance of plexiglass. Please, use Rubber cement.

The original rifle had a banded plexiglass sheet. The model also has this part. As an alternative, you can purchase plexiglass tubes (47.6x50.8x1.6) and use the attached detail Plate_for tubes 47.6x50.8x1.6_V2.