Brick Garage with Flat Roof

Brick Wall, Roof, and Garage Door come as separate items to assist with printing and painting. Also, the Garage door can be secured in the open position and details can be added to the inside (Please see Photos).There are four versions of the brickwork. There is a version with just the main garage door, the other three versions have an additional access door that is in different locations. The access door is a separate item that can be printed and painted before printing. Doors are quite thin so you need to glue in place carefully.

This has been designed for OO Gauge, 1/76.2 scale.for HO Gauge print at 87%, 1/87 Scale,for O Gauge UK print at 175%, 1/43.5 Scale,for O Gauge International print at 158%, 1/48 Scale.for N Gauge UK print at 51.5%, 1/148 Scale. (Caution: I have not test printed this in this scale).

For example in pictures printed on an Anycubic Resin Printer, for OO gauge and below a resin printer is probably best.

Items have been designed to consider accuracy vs printability. Hopefully, this design consideration enhances the model without affecting the accuracy too much.

I use AnyCubic Water Washable Resin for most of my items but use AnyCubic ABS Like Resin for anything that needs to be stronger and tougher.

use this link to join CGTrader and download my designs.

https://www.cgtrader.com/designers/PJD1974?referral_id=3218445