This is a Iron man Mark 16 NightClub Bust I was commissioned to make.The custumer wanted it to fit in with his other Bust.Its life sized and roughly measures 2.5 feet or 30 inches.

1.- The helmet is free and can be found on Thingiverse.The helmet is included in this download.

2.- The Stand Door uses 16 - 5x1 Magnets.

3.- Mirror missing parts - All parts marked with (L) at the end of its name can be mirrored to provide the missing right half. This can be done in your slicer of choice or alomost any 3d modeling program.

4.- Pieces marked with a number - Any model marked with a number represents the amount you will need. I.E.- X4 Means you need to Print 4 of that Piece.

5.- You can use the light plates to trace out and cut pieces of plexi glass to fill the light spaces. This is a bit harder and time consuming but looks better. Optionly you canuse thin clear plastic for the under the light plate parts. A clear plastic soda bottle will work if necessary.

6.- Channels were made throughout the statue to accommodate lights and wires. Be sure to remember this when slicing.

7.- The Helmet Arm assembly uses 2 inch long bolts and can be found at your local hardware store.

Enjoy