1/11
Scale: 1/87 (H0)
Printing technique: FDM (four colors print)
Design: portal Weilburg South
you can see the real object here:
https://commons.wikimedia.org/wiki/File:Weilburg_-Tunnelensemble_S%C3%BCdseite%28004%29.JPG
Model size: X:231mm Y:125,5mm Z:166mm
Printer: Anycubic Kobra S1 with one AcePro (four colors)
Filament colors: (1)black (2)gray (3)red (4)yellow (the gray and red should be matte)
What you'll receive after downloading the project:
1) STL file: a single-file (one color) of the entire Weilburg South portal design, without supports, in a single STL file. You can print it on a single-color printer with the supports added, but I'm treating this file as a preview file showing what the project will look like.
2) 3MF file: project Anycubic Next Slicer (based on Orca Slicer). This file contains a ready-made project for printing on a Kobra S1 printer equipped with one Ace Pro (four colors). You can open this file in a slicer and make any necessary changes to the settings I suggested (if you think any parameters should be changed). I suggested manually adding tree-type supports: Top Z distance = 0.18 and Bottom Z distance = 0.2I assume that the project can be printed on other color FDM printers, not only the Anycubic Kobra S1, but I only have this coor printer and I have no way to verify it.
If you want to make sure you can print this design, download as trial the free model H0 Railway Crossing Hut (4Kobra4colors):
