H0 scale Catenery Tension and Power Poles type C8 - FDM 3D print model

Modeling scale: H0 (1:87)You can print the LEFT or RIGHT pole - three of the attached files are not symmetrical and require left/right (L/R) side to be set.These models are designed for printing in FDM technology with a 0.1 mm layerOther traction pole models are available for download.Note: I fully realize that the hanger elements are too thick, but this technology (FDM) does not allow printing strong elements that are smaller. The assumption was that commercially available catenary wires could be stably mounted on these poles.