Buzz-bar lock for Fishcon PODs 3D print model

Buzz-bar lock for Fishcon PODs

It locks the buzz to avoid unwanted twists.

Fits on:

• buzzbar with diameter ranging from 10 to 18 mm
• fishcon pods or any bankstick having the last part of the pole equal to 25 mm

M4x 30 screw and m4 nut as indicated in the photo are needed.

Send a message for other dimensions.

3D printing settings:-PETG or ASA-layer height: 0.2mm

• at least 3 shells
• at least 30%infill