Boba Fett Re-Armoured Helmet & Warrior Gaffi Stick Double Pack 3D Files (The Book of Boba Fett) (Save £8 !)

Please note - These are Digital 3D Print files, no physical helmet will be sent.

In this pack you get both the Boba Fett Helmet and his unique Hunter Gaffi Stick!

Helmet Description

Here we have the iconic Bounty Hunter Boba Fett. This helmet has been meticulously designed from scratch to be as accurate as possible as well as logistically simple to print, assemble and paint. These files are modelled after The Book of Boba Fett version with his famous dent and you can also use them to make the awesome Empire Strikes Back version.

We have updated the files to V2 where we lowered the bridge line by around 5mm and moved the forehead arrows up approx 3mm to be even more accurate!

You can use 2 x (4mm diameter x 1mm thick) N42 Neodymium Magnets for the rangefinder to keep it at upright or lowered position. The right ear mechanism all snaps into place but I we would recommend glue.

The head of the rangefinder comes in two versions; The Solid version has 3d model lights which can be painted and the Hollow version allows space for 2 LED's and chip/battery to be fitted as per 501st approval.

The helmet also comes in split versions for smaller printer beds.

The helmet comes in the following parts:

• Main helmet

• Left Ear

• Right ear Inner

• Right ear Outer

• Right ear Lower

• RF Stalk

• RF Head Hollow

• RF Head Solid

• RF Acrylic

• RF Camera

• Borden Connector

• Back Grill

We're very proud of this helmet!

Gaffi Description

Jedha Workshops first weapon design! 

The Gaderffi of ‘Gaffi’ Stick is the traditional melee weapon of choice used by the Tusken Raiders of Tatooine.

There are several variations depending on the style of the user. This is the unique ‘Hunter’ variant we see used to devastating effect in TBOBF and created by Boba Fett himself. It has a none traditional three bladed mace and a thinner and smaller profile pineapple head, with a slightly longer spear as well as an unusual and beautiful three handle set up.

It has been designed for a long 1” (2.54cm) wooden dowel to be threaded through the upper sections, including a small piece for the head to give strength, and a 1/2” (1.27cm) dowel for the lower spear and mace.

All parts are separate for easier printing and building.

Included in this pack are:

• Point

• Pineapple Top

• Pineapple Bottom

• Bend

• Handle (Print x 3)

•Handle Link (Print x 2)

• Spear Link

• Spear Top

• Spear Bottom

• Mace

• You will need a :

• 1” (2.54cm) diameter wooden dowel approx 38cm long

• 1” (2.54cm) diameter wooden dowel approx 5.5cmcm long

• 1/2” (1.27cm) dowel aprox 71cm long

SIZE

This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.45m long.

We are very proud of this weapon!

Please only use for personal printing.

If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!

Head to Patreon and search for 'Jedha Workshop,'

License Type: Personal Use

This purchase grants you a personal use license for the included 3D print files.

You may:

• 3D print the files for personal use

• Build, display, and enjoy the finished prop

Restrictions

The following are not permitted:

• Redistribution or sharing of the STL files in any form

• Resale of the digital files

• Modification of the files for resale or redistribution

• Selling 3D printed kits or finished props made from these files

• Casting or vacuum forming for commercial reproduction

Legal Notice

These models are fan-made creations inspired by existing fictional universes and are not official licensed products.

All designs are original digital works created by Jedha Workshop.

If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:

Head to Patreon and search for 'Jedha Workshop,'