ACEO & TCG Card Cutting Jig STL 3MF | 63.5 x 88.9 mm Cutting Template, Plate and Corner Rounder | 3 Corner Radii | Digital Download

WHAT'S IN THE KIT

· THE FRAME — the accurate one. A window you lay over your paper. Hold it by the two raised thumb pads (set away from the window on purpose, so your fingers are never beside the blade) and run the knife down the inside wall. The wall is vertical, so the blade stays perpendicular and the piece that drops out is exactly the card — corners already rounded. Outer size 91.5 x 116.9 mm, 5 mm thick.

· THE PLATE — the card shape itself with a finger knob on top. Lay it on the artwork and cut around the outside. Slightly less exact than the frame, but you can see what you're keeping — this is the one for choosing which part of a painting becomes the card.

· THE CORNER TOOL — an L-shaped guide for cards you already cut square. The arms lie along two edges, the corner between them is the card radius, and a rib on the outside of each arm means the card butts up against it instead of you lining it up by eye.

3 BLANK PLASTIC CARDS: cut the plate or use the 3mf kit with the 3mm ready version.

VERSIONS: · Sharp 1 mm — barely rounded · Card 3 mm — real trading card rounding (best) · Soft 6 mm — very rounded, modern

Translated with AI tool from italian description (I am the original author, this is a human made piece).

Commercial use: Print & Sell allowed. Do not redistribute the model files. Thank you for supporting my art!