1/35 WW2 Sherman M4 Stowage Set – 22 Unique Models- NO AI

Add a heavily loaded, combat-worn appearance to your 1/35 M4 Sherman with this detailed 22-model WWII Sherman stowage set.

The set contains 22 unique, individually modelled stowage items, allowing you to mix and match the pieces to create different vehicle configurations.

Detailed fabric folds, canvas texture, straps, ropes, buckles, wood grain and surface damage have been modelled into the pieces to give them a convincing scale appearance.

WHAT'S INCLUDED

The set includes a varied selection of WWII field stowage, including:

Rolled blankets, tarps and bedrollsCanvas bags and packsLarge bundled stowageBundled wooden logsStorage boxes and crates44-gallon drums in three condition typesJerry cans in clean and battle-damaged versionsMiscellaneous field equipment and personal gear

The drums are modelled to 44-gallon scale size and include three different appearances: one regular example and two different battle-damaged examples.

The jerry cans include both a regular/undamaged version and a battle-damaged version.

These condition variations allow you to combine new-looking equipment with battered and damaged items to create a more convincing combat-used vehicle.

SCALE

Files are supplied at 1/35 scale.

Recommended proportional resizing:Scale Resize1/16 218.75%1/35 100%1/48 72.92%1/72 48.61%(Finer details may be lost in smaller scales)

3D PRINTING

The download includes:

22 unique 3D models1/35 scale STL filesThe models are particularly suited to resin printing, allowing the fine fabric folds, ropes, straps and surface details to be reproduced.

KIT COMPATIBILITY

The set was developed and test-fitted using the Tamiya 1/35 M4 Sherman kit.

Most of the stowage pieces are independent accessories and can be used with other 1/35 Sherman kits. However, the front sandbag arrangement and rear turret storage box are specifically shaped and sized with the Tamiya kit in mind. Fit on other manufacturers' kits may therefore require minor adjustment.

PERFECT FOR1/35 M4 Sherman modelsWWII US Army vehiclesNormandy and D-Day dioramasEuropean Theatre buildsCombat-loaded Sherman modelsWWII military dioramasCustom AFV projectsResin 3D printing

Mix and match the 22 unique models to create your own stowage arrangement and give each Sherman its own individual character.

Tank, crew figures shown in the photographs are NOT included.

Designed by LJC Designs.

3D printing settingsPRINTING & MANUFACTURING

The models have been test printed successfully using both FDM and resin 3D printing.

FDM PRINTING

Tested using an Elegoo Centauri Carbon with standard PLA printing settings.

Recommended starting point:

Printer: Elegoo Centauri CarbonMaterial: Standard PLALayer height: 0.20 mmSupports: As required for individual partsInfill: Standard settings

The models were successfully printed using standard PLA settings. For the finest details, a smaller layer height may be used if desired.

RESIN PRINTING

The models have also been test printed using an Elegoo Saturn 2 with standard resin printing settings.

Recommended starting point:

Printer: Elegoo Saturn 2Material: Standard 405 nm resinLayer height: Standard resin settingsSupports: Use the supplied pre-supported filesExposure: Standard settings for your chosen resin