35mm Swivel Vacuum Cleaner Adapter / Hose Connector

This practical 3D printable adapter is designed to be placed between your standard 35mm vacuum tube and the cleaning nozzle/hose. It allows a full 360-degree rotation, preventing the vacuum hose from twisting or kinking during use. It significantly improves maneuverability when cleaning tight spots or under furniture.

IMPORTANT NOTE: This is a print-in-place design. Once the print is finished and removed from the bed, you will need to apply a bit of force and twist it firmly to break the internal built-in support layer so it can rotate freely!

Features:

• 360° Rotation: Smooth swivel action for effortless vacuuming.
• Compatibility: Designed for standard 35 mm vacuum tubes and accessories.
• Functional Design: Print-in-place multi-part design optimized for airflow.
• Tested: Fully functional and real-world tested.

Recommended Print Settings / Ajánlott beállítások

POST-PROCESSING / UTÓMUNKÁLAT: Take it off the print bed and firmly twist/rotate the parts to break the internal fusion/supports. Once it clicks, it will spin smoothly! (A nyomtatóágyról levéve erősen tekerd el a két részt, hogy a belső támasz eltörjön és finoman forogjon!)Material: PETG or ABS/ASA is highly recommended for the moving parts to ensure longevity under friction. (PETG vagy ABS ajánlott a kopásállóság miatt).Walls / Perimeters: 3-4 walls minimum for structural strength. (min. 3-4 fal).Infill: 20-25% (Gyroid or Grid pattern). (20-25% kitöltés).Supports: NO external supports needed for the rotation mechanism, it is built-in. Only standard build-plate supports if your slicer requires it for the outer rims. (A forgó mechanizmushoz NEM kell külső alátámasztás).Layer Height: 0.2 mm. (0.2 mm rétegmagasság).