This model is inspired by the 2021 movie Dune. This digital 3D printable model is a casing for a pencil Sharpener. Use a hot glue gun or super glue to attach the pencil sharpener. Don’t glue the sandworm to the dune as you would not be able to empty it.
The download contains pieces of the model ready to be 3D printed on a 200 mm print bed. All parts are placed on the print bed as we would print them to save you time.
SIZE To make it fit your pencil sharpener you can change the size of the height adjuster file. Measure the distance from the bottom of your pencil sharpener to the centre of the hole and make it lower by 1mm for each mm over 5mm or make it 1 mm higher for each mm lower than 5mm.
The total dimensions of this model are approx.: Width: 6 mm Length: 105 mm Height: 45 mm You can scale the model as you wish.
3D PRINTING SETTINGS The model prints without supports. The one in the pictures was printed without them and most printers should be able to bridge the gap inside.
The sand was printed with Fillamentum Mukha PLA
We use these settings for most of our prints: Layer height 0.2 mm Infill 15% Printing settings will vary greatly depending on your specific printer.
If you want to put more effort into it to make it look more realistic you can post-process the print so it has a painted finish.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/