Box to integrate a thermometer in the structure of the Ender 3 V2 printer. Printed in ABS as it has to withstand the heat inside the closed printer. Extruder at 250ºC and bed at 80ºC.

Screws:

• Four M3x16 mm
• Two M5 x 10 mm
• Two slot nuts

The thermometer is from Aliexpress: https://es.aliexpress.com/item/4000237921477.html?spm=a2g0o.detail.1000060.2.36dc3b02mIAOgx&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.169870.0&scm_id=1007.13339.169870.0&scm-url=1007.13339.169870.0&pvid=0fb867a6-7d77-46da-bdf9-0bd0e01c497b&_t=gps-id:pcDetailBottomMoreThisSeller,scm-url:1007.13339.169870.0,pvid:0fb867a6-7d77-46da-bdf9-0bd0e01c497b,tpp_buckets:668%230%23131923%2384_668%230%23131923%2384_668%23888%233325%2316_668%23888%233325%2316_668%232846%238113%231998_668%235811%2327175%2323_668%232717%237565%23792_668%231000022185%231000066058%230_668%233468%2315612%23342_668%232846%238113%231998_668%235811%2327175%2323_668%232717%237565%23792_668%233164%239976%23155_668%233468%2315612%23342