Alternative to the original case for Android box H96 MAX for better cooling.

Original case with zero cooling options. The system overheats and loses performance, in extreme cases permanent damage to the electronics will occur.

My design uses a 60x60 or 50x50 mm fan for cooling and has a sufficient number of ventilation holes. A good quality and quiet fan can be soldered to the underside of the motherboard to the power connector. The system will be well cooled and its response will increase quickly. The box won't have a problem with 4K video playback either.

The case is fully compatible with the motherboard (tested), fixing with self-tapping screws. The model includes 2 different covers, for 50mm and 60mm fan, just choose. Rubber feet need to be glued on the bottom, plexi glass or other transparent material needs to be inserted into the display hole.

It is only a 3D model in different formats.I recommend to print from PLA or PETG, nozzle 0.4mm and layer height 0.2mm