File: Dishwasher.stlName: Dishwaher SignPLA Material: 21.91 grams ( 0.048 lbs) Infill = 10%Size: 92.27 mm (3.63) x 63.50 mm (2.50) x 5.72 mm (0.225")Resolution: 0.20mmLayers: 35 layers Rafts: Yes Supports: NoPrint Time: 1 hr 42 minFunction: Everyone needs a little indicator on the status of their dishwasher to tell others if the contents are clean or dirty. Print these parts in a single color or make the shutter a different color to add some pizazz. It can be printed at any scale but if you print them 1:1 then you can use a qtip stick to hold them together. You can adhere to the surface using double backed tape directly or use a magnetic strip (depends if your dishwasher is non-ferrous stainless steel or ferrous steel). Meta: Dishwasher Clean Dirty Sign Washed Unwashed Fill Empty