What you'll get with your purchase:-.stl and .step files for all parts-Bill of materials for sourcing the hardware and parts you need-Detailed instructions to make the assembly process a breeze

3D printing shouldn't require you to compromise your health. 3D printing releases harmful VOC's (Volatile Organic Componds) as the material is heated through the nozzle. Materials such as ABS are notorious for fumes as a result of these particles. HEPA filters are not efficient at trapping these VOC's, however activated carbon filters can be used to mitigate their release into your home.

At the same time, minimizing dust and particulates in your enclosure is essential to maximizing print quality and layer adhesion. This system uses a combined carbon and HEPA filter cartridge that can be easily sourced on amazon to give you peace of mind in your home or office.

All parts can be printed without supports, and all parts and components can be sourced easily.

Tools/Supplies you'll need:-Super glue-Soldering iron (optional)-Utility blade, or a rotary cutting tool-Drill with 4.5mm bit or similar

3D PRINTING SETTINGSLayer Height: 0.2mm /Infill: 15-25% /Material: Up to you, PLA will get the job done just fine /Perimeters: At least 3 perimeters of 0.4mm in width are necessary to allow proper anchoring of the four heat-set inserts /Supports: none /Minimum Required Build Volume: 135mm L x 135mm W x 45mm H