This model was designed to be printed in its original scale. The scale is 1/10 It is splitted into several files to have each one fixed to a 250mm x 250mm printing bed Wheel caps separated to use on rc model

I'm adding all the 3D formats for editing purpouses

I used the Cura slizer to make the tests. I used the Ender 3 printer It must be printed in super quality Infill: 20% With support enabled

Please be very careful while printing. The main body parts can´t be printed with plate adhesion setings due to its size.I tried to make the model with the less supporting material as I could. But feel free to modify it.If you are trying to print at a smaller scale there may be some small parts that could result in a wrong printing.