RS Watanabe wheels set for RC drifting wltoys - multi offset 3D print model

Classic Japanese wheels for your RC build.

The front rim diameter is 9x20,5mm, rear 11x20,5mm, the tire diameter is 8x26mm and 10x26mmThey have a 3x2mm mounting hole, they are available in three versions with an offset of -1.5, -2.5, -3.5 millimeters.

The wheels are designed for mini-z and wltoys 1/28 drift cars.Tested on a modified Wltoys K989 RWD.

If you want to sell physical copies of my designs in your store or on your website, please contact me.

Designed to be printed from resin.Test models was printed on Anycubic Photon Mono at 0.05mm layer height, with good results.