Replacement reverse gear button / trigger for the original 6-speed manual gear knob on the Opel / Vauxhall Corsa D and Corsa E. This is the chrome thumb button on the front of the knob that you push to select reverse - when the plastic tab snaps (a very common failure), reverse can't be engaged and the dealer only sells the whole knob or lever.
Modelled from an original part (photos show the original button the model was measured from).
COMPATIBILITY
- Opel / Vauxhall Corsa D (S07), 2006-2014 - 6-speed manual
- Opel / Vauxhall Corsa E (X15), 2014-2019 - 6-speed manual
- Common on 1.3 CDTI (Z13DTH, 90/95 hp) and 1.7 CDTI (Z17DTR) models
Only for the 6-speed knob with the trigger on the front (R next to 1 on the shift pattern). Does NOT fit 5-speed knobs, automatics, or Fiat / Alfa Romeo models.
REFERENCE PART NUMBERS
- Button (stamped on original): GM 009 295 086 / 9295086
- Gear shifter assembly: 55347447 (label: 1.3/1.7 JTD X 4400)
- Related lever numbers: 93189973, 93189924
Please check that your shifter label or button matches these numbers before printing.
3D PRINTING SETTINGS
- Material: PETG, ABS/ASA or Nylon recommended (PLA is too brittle for the hook)
- Layer height: 0.12-0.16 mm
- Walls: 4+, infill 100% for the thin tab and hook
- Print the tab flat on the bed for the strongest layer direction; supports as needed
- Paint or chrome-wrap the thumb pad to match the original finish