This part is a replacement interior door pull handle reinforcement structural bracket and plastic retainer (plastikai durų rankenų laikiklis), custom-engineered for Renault Scenic models. Designed to mount perfectly inside the original door card and trim aperture, this heavy-duty support ensures the main grab handle locks tight without flexing, pulling loose, or wearing against raw interior panel edges under constant pulling force.

Print Recommendations:Material: ABS, ASA, or Nylon (PA) (Highly mandatory to use robust structural materials to withstand continuous mechanical pulling force, daily cycle loads, and high summer temperatures inside the door cavity)Layer height: 0.16mm to 0.20mmInfill: 70–100% (High infill density or heavy wall perimeter loops required to reinforce screw bosses and main load-bearing attachment points)Supports: may vary depending on the model orientation and print bed direction. Please consider your slicer's recommendations

Copyright and usage note: This model is intended for personal use and spare part replacement only. Commercial production requires licensing.