This is the windshield wiper linkage pivot bush or interior door power window regulator cable pulley roller, custom-engineered for Renault Megane models. Designed to sit perfectly on the original motor shaft, linkage arms, or guide rail aperture, this roller ensures the moving assembly glides smoothly without chafing or wearing against raw metal panel edges.

Print Recommendations

Material ABS, ASA, or Nylon Nylon or heavy-duty ABSASA is mandatory over PETG to provide necessary wear and abrasion resistance under constant mechanical cycle friction

Layer height 0.12mm to 0.10mm Low layer height recommended for a perfectly smooth circular profile to minimize friction

Infill 80100 High or solid infill required to withstand cable tension and mechanical torque loading

Supports may vary depending on the model orientation and print bed direction. Please consider your slicers recommendations

Copyright and usage note This model is intended for personal use and spare part replacement only. Commercial production requires licensing.