This part is a replacement vanity mirror protective flip cover (vanity mirror cover), custom-engineered for the sun visor assembly on Renault Kadjar and Nissan Qashqai models. Designed to snap perfectly into the original visor bezel and hinge aperture, this cover ensures smooth pivot action without binding, chafing, or wearing against raw interior trim edges.

Print Recommendations:Material: ABS or ASA (ABS or ASA is strictly mandatory to withstand intense direct solar heat and extreme under-roof cabin temperatures during summer months)Layer height: 0.12mm to 0.16mm (Low layer height recommended for clean cosmetic finish and structural integrity of the small hinge pins)Infill: 50–100% (High infill or high wall perimeter count is required due to the thin-walled profile of the flap)Supports: may vary depending on the model orientation and print bed direction. Please consider your slicer's recommendations

Copyright and usage note: This model is intended for personal use and spare part replacement only. Commercial production requires licensing.