This headlight washer nozzle is a high-accuracy, 3D-engineered replacement part designed for the Renault Clio II (specifically found on RS, Initiale, and high-trim factory bumpers). Reverse-engineered from the original component specs, it features exact fluid routing channels and secure bumper mounting tabs. It serves as a direct replacement for clogged, brittle, or missing factory nozzles, ensuring leak-free hose connection and correct spray alignment.

Print Recommendations:Material: PETG, ABS or ASA (ABS or ASA is highly recommended to withstand high-pressure washer fluid, road debris, cleaning chemicals, and direct UV exposure)Layer height: 0.20mm to 0.08mm optional (Lower layer heights are recommended to maintain clean, unobstructed internal fluid passages)Infill: 60–80% (Increase perimeter wall lines to withstand fluid pressure cycles and mounting tab flexing during installation)Supports: may vary depending on the model orientation and print bed direction. Please consider your slicer's recommendations

Copyright and usage note: This model is intended for personal use and spare part replacement only. Commercial production requires licensing.