Before purchasing my model, please read its parameters in detail. According to the idea, the neck of the canister is ф38 mm, and it should adjoin one of the sides. On the opposite side, from the neck, I made an imitation of the handle. I equipped the handle with anti-slip ribs.I made a model for the subsequent manufacture of a mold for injection molding. Therefore, I filled the project with Parasolid files.Before making the mold for molding, the model was printed on a 3D printer. The project was supplemented with a _stl file. (C - canister without a lid - 59000, SK - canister with a lid - 91000).I made a model with a lid and upload the files:3d max - medium polygonality.obj - high polygonality.Volume 1 liter. Height without a lid 223 mm.