This is the trim plug/cap set, custom-engineered for the Renault Megane panel assembly. Designed to sit inside the original screw or clip aperture, these small caps (tapitas) ensure the raw openings are covered cleanly without chafing or wearing against raw panel edges.

Print Recommendations:Material: ABS, ASA, or PETGLayer height: 0.16mm to 0.12mm optionalInfill: 40–60%Supports: may vary depending on the model orientation and print bed direction. Please consider your slicer's recommendations

Copyright and usage note: This model is intended for personal use and spare part replacement only. Commercial production requires licensing.