The car model is designed as a single-piece 3D printable object.The body and wheels are included in one unified model file.

The model is provided in .OBJ, and .STL formats to ensure compatibility with most slicer software and 3D printers.

Printing Instructions

Choose Your FormatUse the provided .OBJ, or .STL file according to your slicer software.

Recommended Print Settings

Material: PLA or PETG

Layer height: 0.2 mm

Infill: 15–25%

Supports may be required depending on printer capabilities, overhang angles, and selected print orientation.

Orientation Tips

Printing the model flat on the build plate is recommended for consistent results.

Orientation can be adjusted to reduce support usage or improve surface quality in specific areas.

Printing Notes

The model prints as one single part.

Allow the print to cool before removal from the build plate.

Additional Notes

Wheels are fixed elements of the model and do not rotate.

Light sanding may be applied if needed.

The model can be painted after printing.

When scaling, apply the same scale factor to the entire model.