This model is ment to be printed in RESIN

This model was created in Sketchup and converted to different formats. The 3d formats are intended to edit the model if you want to change something. Due to the size of the model, it was splitted in parts (please refer to pictures).

You'll find parts that are designed to assamble the model with glue, and other to assamble without it. Some parts are splitted to avoid support. These parts also are added in one single part if you want to print it with support.

stl files in one RAR file, editable files in one RAR file.

I printed the model in 1/20 (5%) scale and it worked fine. I advice not to print it smaller (there are many parts that can't stand smaller scale), but is intended to be printed in 1/10 (10%) scale.

I used clip wire for the steering column (35mm) and steering joint (50 mm from center to center).

I used The Ultimaker Cura software to preview the model printing sets:

Scale: 2.33% (1:43)

You'll need to get 1.5 mm diameter rods to fit the wheels.