Description

Very detailed arrow turn signals for your model car building.
Also suitable for roof lights for trucks.
The model is made with a single and as a combined with 12 pieces in a row.

Printing details

Can be a bit tricky to print, but has been tested and printed many, many times, so absolutely possible.
Print in clear resin and paint the orange from the backside and chrome around the edge on the outside.
Print in low layer height and with as low exposure as possible for better details.
Only 5 mm / 0.196 in long and 1.3 mm / 0,051 in wide
Can be printed flat, with 3 small supports on each glass.

The model was made for 1/24 models. Just scale it up or down as needed.