1/19
3D model descriptionMeet Peter Porker, the hilarious and iconic anthropomorphic spider-pig from the Marvel Spider-Verse! Born a spider, he was bitten by a radioactive pig (Aunt May Porker) and gained super porcine powers to become the beloved Spider-Ham.
Key Model Features:Default Height: 20 cm (Feel free to scale it up as much as you like! Note: Joints are only limited if you scale down).Assembly: Multi-parts design with NO AMS required!Tested: Fully test-printed and assembled with perfect fitting.Video Preview: Check out the assembly and details here: https://www.instagram.com/timroy3d/
Important Note on the Web Details:The black web lines on the suit need to be hand-painted if you want black webbing. However, I have also included an additional 3MF file configured for AMS printing specifically for the web pattern (since the webbing is too thin to be split into separate physical parts).
Package Includes:
Complete STL files set
2x 3MF files:
1x Setup file for printing WITHOUT AMS
1x Setup file configured for AMS printing (for the black web lines)
3D printing settings Recommended Print Settings:
Layer Height: 0.16 mm (for ultra-smooth surface finish & crisp details)
Infill: 5- 10% (Gyroid recommended for structural strength)
Supports: Tree supports enabled
Top Z Distance: 0.25 -0.27mm (for effortless, clean support removal)
Adhesion: Brim highly recommended for small or narrow parts
REVIEWS & COMMENTS
accuracy, and usability.
Spider Ham Peter Porker Multi Parts 3MF NO AMS Included 3D print model
- Yours forever — royalty-free license
- All 3 file formats included
- Instant download after purchase
