3 inch fpv drone powered by 2S batteries. Even this model does not involve any difficulty in printing even for the less experienced. With a simple and lightweight design the drone turns out to be a lot of fun to fly. All projects are tested as can be seen from the flight test photos and video.Link video test: https://youtu.be/AzpfB2hBdP4

Required material:

• 1 connector XT60
• 4 screw M2x5 (for frame.)
• 2 screw M2x6 (for support XT60)
• 2 screw M2x5 (for support camera)

Print settings for PLA

• nozzle temperature: 195°
• plate temperature: 55°
• infill: 50%
• support: no

Print settings for PETG

• nozzle temperature: 230°
• plate temperature: 55°
• infill: 50%
• support: no

Components:

• camera: foxeer razer nano 1200tvl
• flight controller: jhemcu ghf420aio f4 osd
• motor: racestar 1103 br1103b
• vtx: mini txt5848 48ch 5.8g
• buzzer: hglrc ws2812
• proppeler: gemfan hurricane 3018
• battery: zop power 7.4v 850mah