This penguin’s feeling lit!● This STL file is recommended for FDM Printers!● 3D Printing Time Based on Ender 3: 08 Hours, 08 Minutes (will vary accord to you printer model)● Approximately Height: 8,5 cmSUGGESTION LINKSThe links below are suggestions for the flameless candle. Attention to dimension, max acceptable is 35mm (1.4") in the diameter.
You Will Need To: Flameless LED CandleAliexpress (Select option A 40mm x 35mm)3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)● Line Width/ Nozzle: 0.4 mm● First Layer Line Width: 0.48 mm / 120%AmazonMercado Livre● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)● Recommended Initial Layer Height: 0.16 mm● Recommended Layer Height: 0.16 mm● Recommended Perimeters/ Walls: 3.● Recommended Infill (%): 10% (Gyroid)● Needs Support: Yes. you will used (Tree manual) support only “Top Candle File” on candle hole● Build Plate Adhesion: None.The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.Happy Printing