A full size printable model of Yuffie's ultimate weapon, the Fuma Shuriken, from Final Fantasy 7 Rebirth.The model has been divided for easy assembly and disassembly, or all of the pieces can be glued together.For a disassemblable model the following additional hardware is required:1 1/2x 12 hex bolt1 1/2hex nut2 1/4 x 1.5hex bolt2 1/4 hex nutsThe larger end has been designed to fit a 3/4" diameter socket for assembly of the large bolt.

Print 1 of each file with the exception of the following:Large Blades - 2Small blade end 1 - 2Small blade end 2 - 2Cover large end - 2Cover small end -2Gold inlay - 2Gold decoration - 2Gold endcap - 2Nut - 4

To assemble, glue the large blades to the large and small blade rings.Glue the gold inlays, end caps, and decorations to the large end.DO NOT GLUE THE LARGE OR SMALL COVERS IF YOU PLAN ON DISASSEMBLING THE MODEL

Optional - Glue the grip and grip gold sections together

Assembly:Insert the small blade ring into the small endInsert the 1/2hex nut into the slot until the holes alignInsert the 1/2 bolt into the large endStack on the grip sectionsAdd the small endGently tighten the bolt using a 3/4socketInsert the large blade ring into the large end and secure with 2 1/4 x 1.5" boltsSlide in the small and large end covers to hide the bolts and nutsSlide on the 4 small blade endsPress on the 4 nuts to hold the blade ends in place.