M
marcel-7cf57e marcel-7cf57e
incredibe easy printable . i scaled this up to 1:10 . the shell becomes a bit on the thick side, but for a scale model just fine..
Useto navigate. Pressescto quit
PONTIAC FIREBIRD KITT 1982 Mini-z compatible 3D print model
Description
This is a body of a 1982 Pontiac FIREBIRD KITT , Mini-z compatible. Headlights are exchangeable to up and down position. Very detailed, designed and optimized for 3d printing. Also designed to have good impact resistance.
I made files so you can choose how to print this:
-If you want a body with 3mm/2mm LED holes or not. -If you want pop-up headlights with or without 3mm LED holes. -If you want to print the body horizontally or vertically both the LED and the no LED versions of the body. -The version to print vertically has a flat surface, so you get good bed adhesion and easy assembly after printing.
The body is scaled to be used on a 98mm chassis. It will fit other chassis compatible with mini-z (e.g. wltoys k969) as long as the wheelbase is set to 98mm. Front and side mounts are included. Wheels are not included.
Printed weight should be around 46 grams. Spoiler is to be printed separately, and press-mount. Headlights can be fixed using 2xM2 screws (any small screws should work). You can also use glue.
PS: If you print it, please post a make!
Glossy make by marcel-7cf57e at 1:10 scale.
Thank you!
Similar Models
to PONTIAC FIREBIRD KITT 1982 Mini-z compatible
