-This is Destiny 2 Handcannon Hawkmoon ornament On Ashen Wings. Its a 3D model (STL) split into a few smaller pieces for better looking result and more options.
- Prop fully built measures around 40 cm in lenght if you want smaller prop you can also adjust it in slicer.
- Most parts are positioned in teh correct way for printing. Wings can be adjusted to your own liking.
- There are a few veriations of the main body. The is one with the pins on top to hold the sight plate and there is one that have that separately. Also you have both options cut in half, thats mosly because its harder to get the trigger, hammer and drum arm inserted when its separate.
- Side wings are ether in one piece or separated for easier printing (If you print them separately I recommend to put them to the side of the barrel and glue them together that way or just glue them directly to the barrel).
- To add those three pieces you will need some sort of wire to work as a shaft
- Drum arm stop needs to be glued on the back right side of the barrel piece
- On the back of the drum there is an insert for 22mm bearing so you can spin the drum
- There is only one Side laser and top plate side but you will need two of each, just mirror them.
- I would sugest to use resin printer for pieces like Tube and Wings just to keep all the details. But if you dont have that option I printed all prices on FDM aswell and it works just fine.
- For gluing I recomand any super glue.
- Pieces can come together nicely. You can easily insert main body pice back in handle and slide it in the barrel when both barrel pieces are put together.
For finished product or any other finished products from destiny universe you can check my listing right here. https://www.etsy.com/listing/932183820/destiny-2-replica-hawkmoon-on-ashen?ref=shop_home_active_1&sca=1
=====!!!! IMPORTANT !!!!===== Do not resale the 3D files, for private use only.
