THE SITH ACOLYTE MASK Back- STAR WARS 3D PRINT MODEL

Sith acolyte mask from Star Wars.

This model is part of a wearable helmet. The helmet is quite big and is meant to be post-processed.

Files contain back pieces of the mask ready to be 3D printed and complete mask files, that are not cut into smaller pieces.

SCALEAt 100% scale the masks inside dimensions are:Width approx. 197 mm Length approx.137mm Height approx. 228 mm You can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.

We recommend joining the front and back part of the helmet by fabric rubber bands that are glued to the inside by using epoxy. That should allow you to stretch it when you put it on, and hold it when you wear it.

PRINTER SETTINGSAs the mask is quite big, it is meant to be post-processed. We recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic.Here are some links to our website and social media where you can see more of our creations:

https://3d-mon.com/links/