Frieren's Staff / Wand from Frieren: Beyond Journey's End. It is a highly detailed model that is designed for 3D printing. All details are engraves or reliefs. Perfect for Frieren Cosplay and decorating

--Dimensions—

Staff has 145cm total length. There is a 140cm x 5mm diameter rod slot inside of the sword for extra durability. This is valid if you print center rod piece 10 times. Actually it doesn't have a fixed size. You can make the staff longer or shorter in multiples of 10cm by printing more or less center rod pieces. Don't forget to lengthen or shorten the steel rod you gonna buy.There is also adapters for external wooden rods or vileda rods etc. The diameter of the adapter varies from 15mm to 25mm.

--Assembling—

There is a how to assemble animation between the files. It'll guide you.All parts are sliced under 20cm so you can print them with almost any 3D printer.

There is 0.4mm tolerance gap between sockets and plugs. İf you use a standart FDM 3D Printer with 0.4mm nozzle, it should be perfect fit. If it's a little loose, don’t worry. The main task of the plugs is to keep them stable and correctly oriented while you are pasting the parts.

--Recommended Printing Options--

I suggest that you have done tolerance and flow rate tests on your 3d printer before you start printing the model. I recommend minimum 3 walls and 20% or more infill rate for all parts, especially for the center rod.

If you have any questions or requests, feel free to message me. I'll gladly help as much as i can.

don't forget to follow me on instagram! you could reach me on DM and follow my productions as well@random_but_qualityhttps://www.instagram.com/random_but_quality

Also you can check my youtube channel! I upload short timelapse and long painting videos of my modelshttps://www.youtube.com/@randombutquality