ATTENTION: This pack of 3D files does not contain everything you need to build your own Commander Cabinet, but contains various parts of my cabinet project so you may use them in your own construction! Additionally, some of these files are LARGE and may need to be broken into smaller pieces to print on your 3D printer! These are the 3D files I designed to build my Colorfully Complete Commander Cabinet. My cabinet holds 32 commanders, a few playmats, a tablet, and a drawer for accessories!The shelving unit is designed to fit UG Sidewinder deck boxes. It will not work for other sized deck boxes.The drawer is a bit snug if printed at full size. I recommend shrinking it just a little before printing.Tablet holder is designed for a Lenovo M9 tablet. It can be adjusted in size for other tablets.The Coin ring uses 5x 1.25diameter, 0.125 thick neodymium disk magnets to hold the coins (you will need to glue a metal disk between the two coin halves) and 5x 0.7diameter, 0.12 thick magnets to hold the coin ring to the cabinet doors. I used 4cm adhesive metallic plates from amazon for the attachment points of the magnets.The color wheels use 5mm rhinestones with adhesive backing.The deck labels use 2x0.5 label stickers.

Please feel free to contact me with any questions!