Card Game Box with Hinged Lid 3D print model

This card game box is perfect for storing games such as UNO and Phase 10. The cardboard boxes these card games come in get torn up pretty quickly. Just write the name of the game on the lid with a sharpie and you'll have a much nicer way of storing your card games. This box will hold about 130 cards, so it's suitable for most 100+ card games on the market. The lid snaps closed tightly, opens easily and is hinged, so it won't get lost. A piece of filament is used as the hinge, and is mechanically very strong. The inside dimensions of the box are 90mm x 65mm x 40mm (Approximately 3 1/2x 2 1/2 x 1 1/2")

• Slicer Settings:
• Layer Height: 0.2mm
• Wall Thickness: 1.6mm (4 perimiters)
• Top/Bottom thickness: 0.8mm (4 layers)
• Infill Density: 20%
• Nozzle Temperature: 200 Deg. C
• Build Plate Temperature: 50 Deg. C
• Print Speed: 50mm/Sec.
• Supports: No