Barricade Controller Holder 3D print model

3D MODEL DESCRIPTION

Your controller won’t get caught in the crossfire, but maybe you should take cover.

This STL file is recommended for FDM Printers!3D Printing Time Based on Ender 3: 2 Days 22 Hours 18 MinutesApproximately Heigth: 23 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mmFirst Layer Line Width: 0.48 mm / 120%Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)Recommended Initial Layer Height: 0.16 mmRecommended Layer Height: 0.16 mmRecommended Perimeters/ Walls: 3.Recommended Infill (%): 10% (Gyroid)Needs Support: Yes.Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!