Hey everyone!

I’m super excited to share a brand new 3D printable design with you — an Articulated Crystal Spider. Would love to hear your thoughts about it :)

Recommended Print Settings:

• Printer Type: FDM
• Layer Height: 0.16–0.2 mm
• Infill: 10–15%
• Walls/Perimeters: 2–3
• Top/Bottom Layers: 3–4
• Supports: Not required
• Brim: Optional (use if needed for bed adhesion)
• Material: PLA recommended
• Nozzle Temp: 200–210°C
• Bed Temp: 50–60°C

Assembly Instructions – Crystal Spider :

Your spider model comes in two separate files:

• Spider_Body.stl
• Spider_Parts.stl (includes crystals, fangs, eyes, and optional pin)

All parts are print-in-place friendly, but require a bit of post-print assembly. Here's what you need to know:

** 1. Gluing the Parts**

All additional parts (crystals, fangs, eyes, etc.) are designed to be glued into the body.Use a small amount of superglue or plastic glue. The contact points are keyed and should align clearly.

Tip: Dry-fit the pieces before applying glue to ensure correct orientation.

** 2. Spider Back Crystal**

This centerpiece crystal can be attached in two ways:

Option A – Glue it in:Just like the other parts, you can simply glue it into place.

Option B – Lock it in with the pin:Included in the parts file is a small printable pin that can be used to mechanically lock the crystal into the body.It will require a slightly firm push to snap in — this is intentional for a tight, secure fit.

Tip: If the fit is too tight, gently sand the pin or socket for easier insertion.

All parts are optimized for support-free printing, so you can simply load the file and start printing without extra setup.

Scaling NoticeThis model is carefully tuned for smooth articulation at its original size. Scaling the model up or down may affect joint tolerances, causing parts to become too tight or too loose.

Please Note:

• This is a digital download. No physical item will be shipped.
• Files are for personal use only. Redistribution, resale, or sharing of the digital files is not permitted.
• Want to sell physical prints? A commercial license is available through my Patreon.

Copyright NoticeAll designs by Kogi3D are copyrighted. With your purchase, you gain the right to download and print the design for personal use only. You are NOT allowed to resell, distribute, or modify the digital files in any form, including remixed versions. Selling prints of the design without prior authorization is prohibited.