1/5
A 3D printable laptop stand with two open truss risers, six top ventilation slots, front retaining stops and two keyed crossbars. The assembled stand is 260 mm wide with an 18.4 degree incline. Print one left riser, one right riser and two copies of the crossbar. Includes 3 unique STL parts and matching 3MF files; print 4 pieces total. Assembled size: 260 x 210 x 82.00 mm (width x depth x height). Digitally checked design; physical print, fit and load testing are required before device use.
FDM, 0.4 mm nozzle, 0.2 mm layers. PETG is suggested for a warm device environment. Start with 5 walls and 40% infill. Risers are supplied on their outer sides with socket openings facing up; crossbars lie flat. Inspect the vent bridges in the slicer and add local supports if needed. Dry-fit then bond the four crossbar joints for rigidity. Fit optional non-slip pads. Check your device footprint and contact points before use.
REVIEWS & COMMENTS
accuracy, and usability.
Ventilated Laptop Stand with Modular Risers 3D print model
- Yours forever — royalty-free license
- All 2 file formats included
- Instant download after purchase
