Tactical Soldier GPU Support Stand 74-114 mm - 3D Printable STL

Tactical soldier-themed adjustable GPU support stand designed to help support a graphics card and reduce GPU sag inside a PC case.

The height is adjusted through the threaded mechanism, allowing the support to fit the space between the graphics card and the bottom of the PC case. The tactical soldier figure is integrated into the support for a distinctive gaming setup aesthetic.

Features

• Adjustable height: 74-114 mm
• Body dimensions: 17 x 17 mm
• Thread-based height adjustment
• Diamond-textured adjustment rings for improved grip
• Tactical soldier design
• Compact and sturdy construction
• Designed for 3D printing

Recommended Print Settings

Printer: Bambu Lab A1 Mini
Nozzle: 0.4 mm
Material: PETG
Layer Height: 0.20 mm
Initial Layer Height: 0.20 mm

Walls

• Wall Loops: 6
• Detect Thin Wall: Off
• Alternate Extra Wall: Off

Infill

• Infill Density: 30%
• Infill Pattern: Gyroid

Top / Bottom Shells

• Top Shell Layers: 5
• Top Shell Thickness: 1.0 mm
• Top Surface Density: 100%
• Top Surface Pattern: Monotonic

Line Width

• Default: 0.40 mm
• Outer Wall: 0.40 mm
• Inner Wall: 0.40 mm
• Top Surface: 0.40 mm
• Sparse Infill: 0.40 mm
• Support: 0.40 mm

Seam

• Seam Position: Aligned
• Seam Gap: 15%
• Smart Scarf Seam Application: Enabled
• Scarf Application Angle Threshold: 155°
• Scarf Steps: 10
• Scarf Joint for Inner Walls: Enabled
• Wipe Speed: 80%
• Role-Based Wipe Speed: Enabled

Ironing

• Ironing Type: Topmost Surfaces
• Ironing Pattern: Rectilinear
• Ironing Speed: 30 mm/s
• Ironing Flow: 10%
• Ironing Line Spacing: 0.15 mm
• Ironing Inset: 0.21 mm
• Ironing Direction: 45°

Bed Adhesion

• Skirt Loops: 2
• Skirt Height: 1 layer
• Skirt Distance: 2 mm
• Brim Type: Auto
• Brim-Object Gap: 0.1 mm

Other

• Prime Tower: Enabled

Note

These are the settings used for my test print with PETG on a Bambu Lab A1 Mini using a 0.4 mm nozzle. Depending on your filament, temperatures, cooling and printer calibration, minor adjustments may be required.

File Information

File Format: STL
Recommended Material: PETG
Recommended Use: PC builds, gaming setups, custom 3D-printed components and gaming-themed setups.