Bracelet for placement of Airtag. Ideal for locating dependent people or children in situations where they can get lost in the crowd.It is designed to be quick to put on, but difficult to remove, which is important to avoid unwanted manipulation.Thanks to the ergonomic design of the strap, the bracelet can be worn for hours without inconvenience.

Before printing, choose the strap size you want. There are 8 different sizes. If you need any different size, please contact us.

Once the three parts are printed, assembly is extremely simple:-Insert the ends of the strap into the slot in each half of the case. Note the position. You can be guided by the pictures and animations.-Insert the Airtag into either half of the case.-Place the strap together with the Airtag and both halves of the case around the wrist of the wearer.-Press the half that does not contain the Airtag against the one that does. Be careful not to pinch the skin when closing it.

Disassembly is carried out as follows:-Insert the included small tool or any thin object (e.g. the end of a spoon) into either of the two slots between the strap and the case.-Separate the two halves of the case by exerting force. You can help yourself with the pictures.

Two additional cases with Mickey and Minnie faces are included in the pack.If you wish, the design can be customized with the embossed image of your choice (only one customization per purchase).

3D PRINTING SETTINGSPrinted with OrcaSlicer and Bambu A1 MiniPrinted with PLAPrint temperature: 210ºBuild plate temperature: 60ºLayer height: 0.12 mmInfill: 100%NO necessary supportsThe strap and case should be printed vertically as shown in the images.