Spool Holder Anti Tangle 3D print model

Spool Holder STL Files | 3D Printable In Any Filament | STL files (And More Digital Formats)

You are purchasing digital files, so no physical items will be sent to you! You can 3D print these objects yourself after purchasing the digital files.

WHAT YOU GET Digital STL files i created myself. Also FCSTD, STEP, OBJ & WRL are included. You can alter the FCSTD files in FreeCAD.

REFUND Not satisfied? Ask for a refund!

When i'm using a new spool of filament, it always tangled outside the roll. Because of the bow shape the filament follows, there's a big chance that the filament falls off the roll and gets entangled. So i designed my own filament spool holder!

How i 3D printed it: https://youtu.be/nVngIuVHnVI How i designed it: https://youtu.be/8UKH09hCqxo

You can slide the spool with filament on the holder. Then put the holder with spool on the stand. You can carry the spool together with holder, because of the handle on the top. There are two grooves in the holder which put it on a fixed position on the stand.

Suitable for spool with an outer diameter of ø200mm. The inside diameter must be ø54mm and the width of a roll can have a maximum size of 78mm.

Usage of any models from 3DParts4U will be at your own risk!

My PLA Simplify3D print settings:

• 3600mm/minute (60mm/second)
• hotend 185°C | bed 55°C
• 250 micron | infill 60%
• 3 top layers | 3 bottom layers | 3 outline layers
• brass nozzle 0.35mm
• extrusion width 0.44mm
• retraction 1.00mm
• extrusion multiplier 0.95
• coasting 0.30mm
• wipe distance off
• fan 100%
• no support needed