The Purge - Masks

These are a digital 3D printable models of masks from the Purge.

You can find separate masks on our website: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/the-purge-masks

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.

SIZE

At 100% scale the Cross and Butterfly mask dimensions are approximately:

Width 165/170 mm

Length 97/127 mm

Height 143/166 mm

At 100% scale the Bunny masks dimensions are approximately:

Width 170/225 mm

Length 112/160 mm

Height 287/295 mm

At 100% scale the Shotgun and Skull dimensions are approximately:

Width 172/160 mm

Length 110/142 mm

Height 110/114 mm

You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.

3D PRINTING SETTINGS

We use these settings for most of our prints:

Layer height 0.2 mm

Infill 15%

Supports 45°

For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

We try to make the models in a way that uses as little support material as possible.This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:

https://3d-mon.com/links/