Gandalf the Grey Rivendell Staff 3D print model

This is a digital 3D printable model of Gandalf the Grey's Rivendell Staff from The Lord of the Rings which he used to defeat Balrog.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.

We recommend printing the cut version and inserting a 1/2 inch (or 12 mm) stick that is 1540 mm long into the 13mm hole.

SIZEAt 100% scale, the model’s dimensions are approximate:Width 190 mmLength 83 mmHeight 1655 mm

3D PRINTING SETTINGSWe use these settings for most of our prints:Layer height 0.15 mmInfill 15%Supports 45°For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

Printing settings will vary greatly depending on your specific printer.

We try to make the models in a way that uses as little support material as possible.This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models.