Elegant Venetian-style masquerade mask featuring symmetrical baroque scrollwork, raised ornamental flourishes, and a refined half-face silhouette. Suitable for cosplay, masquerade events, wall decor, or high-detail 3D printing projects.

The mask follows facial contours for a balanced and comfortable fit while maintaining a dramatic, theatrical presence inspired by traditional Venetian gala masks.

Measuring Instructions

For human wear

Measure the width of your face from temple to temple.

Measure distance between outer eye corners.

Measure nose bridge width and length.

Scale uniformly to match your face width first.

Adjust slightly in height if needed for eye alignment.

Printing Tips

Suitable for PLA, PLA+, PETG, PLA-HT, FPLA, elastomer-based filaments, and resin.

Recommended layer height:

0.12–0.20 mm for FDM

0.05–0.1 mm for resin

Print orientation:

Front face angled almost upward for best surface quality.

Supports recommended under nose and deep scroll overhangs (tree supports preferred).

Infill:

10–15% for cosplay

100% or resin solid for display version

Mask prints as a single piece.

Finishing & Painting Tips

Prime thoroughly to preserve fine scroll details.

Light sanding between primer coats.

Use metallic finishes (gold, bronze, antique silver) for classic Venetian style.

Apply dark wash in recessed scrollwork for depth.

Dry brush raised edges for highlight contrast.

Seal with satin or gloss clear coat for gala finish.

Fit Adjustments

Minor contour adjustments can be made using a hairdryer or heat gun on low. Heat gently and shape to your face while warm for improved comfort.