3D MODEL DESCRIPTION

White Sharks are not the villains movies made us think they are! Though it’s best to admire them from a distance, just to be sure.All our fish articulated fish are print-in-place, and designed especially for better and easier assembly. For a mesmerizing movement effect, remember to only glue both sides on the pin connection.

This STL file is recommended for FDM Printers!3D Printing Time: 3 Days 23 Hours and 47 MinutesApproximately length: Shark 25cm x 15cm x 9cm Base 21cm x 13cm x 12cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mmAverage Speed: 20 mm/s (First Layer) / 30 mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)Recommended Initial Layer Height: 0.4 mmRecommended Layer Height: 0.12 mmRecommended Perimeters/ Walls: 3.Recommended Infill (%): 10% (Gyroid)Needs Support: No.Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!